Bore scoring is vertical scratching of the cylinder walls where a piston has scuffed the bore. In Porsche cars it is associated with the water-cooled flat-six engines built from the late 1990s to the late 2000s, most often the larger ones. Early signs are a tick or knock on one side, one sooty tailpipe and rising oil use. A bore scope confirms it, and a rebuild with new liners fixes it.
What bore scoring is
In these engines the cylinder walls are a coated aluminum surface rather than separate iron sleeves. When the piston scuffs that surface, it leaves vertical scores that let oil past the rings and compression out.
It tends to get worse, not better. Cold starts are widely believed to play a part, which matters in a city with winters like ours.
It is a separate fault from the IMS bearing. Both are covered in IMS bearing and bore scoring explained.

The signs
- A ticking or knocking at idle, often from one side of the engine
- One tailpipe sootier than the other
- Oil consumption that keeps rising
- A misfire or a check engine light on one bank
None of these proves bore scoring on its own. They are reasons to have the cylinders looked at before the engine is worked hard.

Diagnosis and the fixes
A bore scope passed into the cylinders shows the walls directly. Compression and leak-down tests add evidence where warranted, along with a full-system scan and a cold-start road test.
If the engine is scored, the fix is a rebuild with new cylinder liners. Machining goes to a trusted partner machine shop, and the engine is assembled, broken in and documented in our shop. See what happens during an engine rebuild.
When a replacement engine is the smarter path, we say so.

Buying or owning one
Bore scoring is a reason to buy carefully, not a reason to avoid the cars.
Inspect first
Our pre-purchase inspection includes known-fault checks for your model, bore scoring included.
Warm it up
Keep the oil fresh and let the engine reach temperature before working it hard.
Act early
Have a new tick or knock looked at before it grows.
Questions owners and buyers ask
Which Porsches get bore scoring?
It is associated with the water-cooled flat-six engines of roughly 1997 to 2008 in the Boxster, Cayman and 911, and is most often reported on the larger engines of that era.
Can bore scoring be seen without taking the engine apart?
Usually, yes. A bore scope passed into the cylinders shows the condition of the cylinder walls. It is part of our pre-purchase inspection where warranted.
Is bore scoring the same as IMS bearing failure?
No. They are two separate faults in engines of the same era. Both can be assessed before you buy.
Can a scored engine be repaired?
Yes. A rebuild with new cylinder liners corrects it. Machining goes to a trusted partner machine shop, and the engine is assembled, broken in and documented in our shop.
Should bore scoring stop me buying one of these cars?
No. It is a reason to buy with an inspection and a service history, not a reason to avoid the model.

